Journal of Welding and Joining

Author index

Page Path

HOME
BROWSE ARTICLES
Author index

30 Articles

A Study on the Optimization of Welding Parameters for Titanium Drums Using Optimization Algorithms: Won-Bin Oh, Bo-Ram Lee, Bong-Yong Kang, Ji-Yeon Shim, Gi-Hoon Lee, Ill-Soo Kim; J Weld Join. 2023;41(3):185-194. Published online June 30, 2023; DOI: https://doi.org/10.5781/JWJ.2023.41.3.7; Full text PubReader ePub PDF

A Study on the Optimization of Welding Conditions for Titanium Drums Using GPS: Won-Bin Oh, Ill-Soo Kim, Tae-Jong Yun et al.; J Weld Join. 2021;39(4):419-426. Published online August 23, 2021; DOI: https://doi.org/10.5781/JWJ.2021.39.4.10
Cited By 1; Full text PubReader ePub PDF

A Study on the Prediction of Real-Time Bead Width Using a DNN Algorithm in GTA Welding: Won-Bin Oh, Ill-Soo Kim, Tae-Jong Yun et al.; J Weld Join. 2020;38(6):593-601. Published online December 14, 2020; DOI: https://doi.org/10.5781/JWJ.2020.38.6.10
Cited By 6; Full text PubReader ePub PDF

A Study on Optimization of Fillet in Laser Welding Process for 9% Ni Steel Using Gradient-Based Optimization Algorithm: Tae-Jong Yun, Won-Bin Oh, Bo-Ram Lee et al.; J Weld Join. 2020;38(5):485-492. Published online September 24, 2020; DOI: https://doi.org/10.5781/JWJ.2020.38.5.8
Cited By 9; Full text PubReader ePub PDF

A Study on Spatter Tracking Algorithm for a Vertical GMA Welding Process: Tae-Jong Yun, Min-Ho Park, Won-Bin Oh, Bo-Ram Lee, Ill-Soo KIm; J Weld Join. 2019;37(4):347-356. Published online August 23, 2019; DOI: https://doi.org/10.5781/JWJ.2019.37.4.9
Cited By 3; Full text PubReader ePub PDF

Optimization of Disk Laser Welding Parameters in Pure Ti Using Taguchi Method: Byeong-Ju Jin, Min-Ho Park, Tae-Jong Yun et al.; J Weld Join. 2018;36(1):34-40. Published online January 25, 2018; DOI: https://doi.org/10.5781/JWJ.2018.36.1.4
Cited By 6; Full text PubReader ePub PDF

A Review on Optimizations of Welding Parameters in GMA Welding Process: Ill-Soo Kim, Min-Ho Park; J Weld Join. 2018;36(1):65-75. Published online February 5, 2018; DOI: https://doi.org/10.5781/JWJ.2018.36.1.8
Cited By 3; Full text PubReader ePub PDF

Optimization of Laser Welding Parameters in Titanium Sheet Using Grey-Fuzzy Logic: Byeong-Ju Jin, Min-Ho Park, Tae-Jong Yun et al.; J Weld Join. 2017;35(6):59-66. Published online November 16, 2017; DOI: https://doi.org/10.5781/JWJ.2017.35.6.9
Cited By 1; Full text PubReader ePub PDF

An Experiment Study for Hardness Characteristic of Weldment according to Welding Heat-Input of Vertical GMA Welding Process: Min-Ho Park, Jong-Pyo Lee, Byeong-Ju Jin, In-Ju Kim, Ji-Sun Kim, Ill-Soo Kim; J Weld Join. 2017;35(2):35-42. Published online April 28, 2017; DOI: https://doi.org/10.5781/JWJ.2017.35.2.6
Cited By 1; Full text PubReader ePub PDF

An Experiment Study for S/N Ratio of Bead Geometry for Guaranteeing the Welding Quality in Bellows Weld Joint: Jong-Pyo Lee, Ill-Soo Kim, Min-Ho Park, Byeong-Ju Jin, In-Ju Kim, Ji-Sun Kim; J Weld Join. 2017;35(2):43-51. Published online April 28, 2017; DOI: https://doi.org/10.5781/JWJ.2017.35.2.7; Full text PubReader ePub PDF

A Study on HAZ Softening Characteristics of Fiber Laser Weldment for High-Strength Steel: Min-Ho Park, Ill-Soo Kim, Jong-Pyo Lee et al.; J Weld Join. 2015;33(6):27-35. Published online December 31, 2015; DOI: https://doi.org/10.5781/JWJ.2015.33.6.27
Cited By 2; PDF

An Experimental Study on Prediction of Bead Geometry for GTA Multi-pass Welding in Underhead Position: Min-Ho Park, Ill-Soo Kim, Ji-Hye Lee, Jong-Pyo Lee, Young-Su Kim, Sang-Oh Na; J Weld Join. 2014;32(1):53-60. Published online February 27, 2014; DOI: https://doi.org/10.5781/JWJ.2014.32.1.53
Cited By 6; PDF

A Study on Bead Geometry Prediction the GMA Fillet Welding using Genetic Algorithm: Young-Su Kim, Ill-Soo Kim, Ji-Hye Lee et al.; J Weld Join. 2012;30(6):126-132. Published online December 23, 2012; DOI: https://doi.org/10.5781/KWJS.2012.30.6.612
Cited By 1; PDF

A Experiment Study of Torch Distance on Automated Tandem GMA Welding System: Ji-Hye Lee, Ill-Soo Kim, Seong-Myeong Jung, Jong-Pyo Lee, Young-Su Kim, Min-Ho Park; J Weld Join. 2012;30(6):49-55. Published online December 23, 2012; DOI: https://doi.org/10.5781/KWJS.2012.30.6.535
Cited By 1; PDF

A Experiment Study on Selection the Optimal Condition for GMA Root-pass Welding in Overhead and Vertical Position: Ji-Sun Kim, In-Ju Kim, Ill-Soo Kim; J Weld Join. 2012;30(6):42-48. Published online December 23, 2012; DOI: https://doi.org/10.5781/KWJS.2012.30.6.528; PDF

A Experiment Study for Selection of Welding Condition of fillet Welded Structure: Hyun-Ho Na, Ill-Soo Kim, Ji-Sun Kim, Ji-Hye Lee; J Weld Join. 2011;29(4):41-47. Published online September 12, 2011; PDF

An Experimental Study on Root-pass Welding of Open Gap by GMA Welding Process in Pipeline: Ji-Sun Kim, Ill-Soo Kim, Chang-Eun Park, Hyun-Ho Na, Ji-Hye Lee, Seong-Myeong Jung; J Weld Join. 2011;29(3):64-69. Published online July 7, 2011; PDF

Application of Magnetic Pulse Welding for Manufacturing Automobile Parts: Bong-Yong Kang, Ji-Yeon Shim, Ill-Soo Kim, Dong-Hwan Park, Kwang-Jin Lee; J Weld Join. 2010;28(5):4-9. Published online November 5, 2010; PDF

A Study on System for Real-time Measurement of Welding Distortion: Jae-won Jeong, Ill-Soo Kim, In-Ju Kim, Sung-Woo Son, Ji-Yeon Shim; J Weld Join. 2009;27(5):62-67. Published online November 16, 2009; PDF

Development of Working Coil for Magnetic Pulse Welding: Bong-Yong Kang, Ji-Yeon Shim, Ill-Soo Kim, Dong-Hwan Park, In-Ju Kim, Kwang-Jin Lee; J Weld Join. 2009;27(4):6-12. Published online September 14, 2009; PDF

A Study about Analysis of Weld Distortion using Genetic Algorithm: Ill-Soo Kim, Hak-Hyoung Kim, Han-Kee Jang et al.; J Weld Join. 2009;27(4):54-59. Published online September 14, 2009; PDF

A Study on Development of the Automated System for In-pipe Welding: Hak-Hyoung Kim, Ill-Soo Kim; J Weld Join. 2008;26(5):16-21. Published online November 12, 2008; PDF

A Study on Real-time Prediction of Bead Width on GMA Welding: Joon-Sik Son, Ill-Soo Kim, Hak-Hyoung Kim; J Weld Join. 2007;25(5):64-70. Published online January 28, 2008; PDF

A Study on Monitoring for Process Parameters Using Isotherm Radii: Ill-Soo Kim, Kwang-Suk Chon, Joon-Sik Son, Joo-Hwan Seo, Hak-Hyoung Kim, Ji-Yeon Shim; J Weld Join. 2006;24(5):37-42. Published online January 4, 2007; PDF

A Study on Development of Sensing System for Welding Automation: Ill-Soo Kim, Bong-Yong Kang; J Weld Join. 2006;24(3):9-14. Published online August 22, 2006; PDF

Development of Experimental Model for Bead profile Prediction in GMA Welding: Joon-Sik Son, Ill-Soo Kim, Chang-Eun Park, In-Ju Kim, Ho-Seong Jeong; J Weld Join. 2005;23(4):41-47. Published online September 22, 2005; PDF

Volume 42, No. 2

Journal of
Welding and
Joining

Print ISSN: 2466-2232
Online ISSN: 2466-2100

MOST VIEWED MOST CITED

7,836	Review on Vacuum Laser Beam Welding
4,289	A Study on Welding-induced Temperature Distribution and Deformation of IMO Type C LNG Fuel Tank Support Structures
4,015	Study on Laser Welding of Dissimilar Materials between Aluminum and Copper (Ⅰ) - Research Trend in Laser Welding Technology and Materials Testing Methods -
3,962	Optimization of FC-CSP and MLCC Soldering Process Using Type 7 Solder Paste
3,883	Recent Studies of Transient Liquid Phase Bonding Technology for Electric Vehicles

Cited By 9	Changes in the Mechanical Properties and Microstructure of High Manganese Steel by High Heat Input Welding and General Welding Processes
Cited By 7	Review on Vacuum Laser Beam Welding
Cited By 6	A Study on Welding-induced Temperature Distribution and Deformation of IMO Type C LNG Fuel Tank Support Structures
Cited By 6	Comparison of Welding Deformation Characteristics by Circumferential Welding for Austenitic and Duplex Stainless Steel Pipe : Experimental Study
Cited By 6	Development and Evaluation of Stainless Steel-Base Flux-Cored Wires for 9% Nickel Steel

Register for e-submission

Register for e-submission
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.

Register for e-submission

Manuscript Submission
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system.
For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.

Register for e-submission

Free archive
Anyone may access any past or current articles without logging in.

Editorial Office: #304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511 Fax: +82-2-538-6510 E-mail: koweld@kwjs.or.kr

Copyright © 2024 by The Korean Welding and Joining Society.